Avoid Premature Coating Failures. NVCR3 salt remover mitigates non-visible contaminates.
Applying coatings to “Clean looking steel” that was abrasive blasted or washed without salt removers
Contaminated Substrates Cause Premature Coating Failures. Add 1% Salt Remover to Potable Pressure Wash Water To Mitigate Salts.
Remove Salts While Preparing Surfaces for Coating.
Dry, Wet, Vapor abrasive blasting can be greatly enhanced with salt remover additive.
High Pressure Water Cleaning with salt remover additive dis-bonds electrically attached contaminates from steel substrates .
Hand, Power Tool Cleaning, Brush Blast Cleaning, Wet Abrasive Blasting are effective at removing accessible tightly adhered black oxides (which are saturated with non-visible corrosive contaminates). Once removed, high pressure water cleaning (5kpsi) with 1% salt remover additive removes corrosive contaminates, dirt and loose rust and corrosive acids from inside connections in preparation for chemical neutralization of corroded / pack-rusted connections.